FEATURES

Hydropneumatic / Hydraulic system for rigid clamping

DC drive for smooth accurate variable speed

Nitrided screw & barrel for longer life
Blow nozzle centering along three axis
Fully automatic Microprocessor control
Choice of single and double station
High output
Parison controller as per requirement
 
BLOW MOULDING SAMPLES
 
 
 
TECHNICAL SPECIFICATIONS
 
MODEL
100 ML
250 ML
500 ML
1 LITRE
2 LITRE
PARAMETERS UNITS
PNSS
100
PNDS
100
PNSS
250
PNDS
250
PNSS
500
PNDS
500
PNSS
1000
PNDS
1000
PNSS
2000
PNDS
2000
EXTRUDER                      
Max. Capacity of container ml 100ml 100ml 250ml 250ml 500ml 500ml 1000ml 1000ml 2000ml 2000ml
Screw Dia mm
25 30 30 40 40 45 45 45 50 60
L/D Ratio
20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1
Plasticizing Capacity Kg/Hr* 7-8 8-10 8-10 14-16 14-16 22-25 16-18 30-33 22-25 42-45
                       
CLAMP UNIT                      
Max. Mould Size (Height) mm 225 225 225 225 225 225 250 250 300 300
Max. Mould Size (Width) mm 125 125 125 125 175 175 200 200 225 225
Min. Mould Thickness mm 90 90 90 90 145 145 150 150 150 150
Max. Mould Thickness mm 125 125 125 125 150 150 200 200 200 200
Mould Opening Stroke mm 125 125 125 125 150 150 200 200 250 250
                       
POWER UNITS                      
Screw Drive Motor Hp 2 3 3 5 5 7.5 7.5 10 7.5 10
Heating Load Kw 4 5 5 6.5 6.5 9 6.5 9.7 9 11
 
Note above parameters are subjected to change for improvement without prior notice.
Throughput depending upon grade of raw material operating and processing parameters.
HY Hydraulic Clamping, PN Hydro Pneumatic Clamping, SS Single Station, DS Double Station

* Depends on Container Size & ideal setting condition
Due to continuous development specifications are subjected to change without notice.

 
 
 

Copyright © 2006 Plastech Inc. All rights reserved